← All guides

How to Store Cricket Balls: Leather Care, Drying and Match-Day Rotation

A practical system for drying, inspecting, labelling, rotating and storing leather cricket balls for players, coaches and clubs.

Cricketer sitting beside the boundary with equipment during a break
Quick answer

Store leather cricket balls clean, dry, ventilated and away from direct heat or prolonged damp. After use, remove loose dirt with a dry cloth, separate wet balls from dry stock, air-dry them naturally and inspect the seam, cover and shape before returning them to storage. Label match and training balls by grade and condition, rotate comparable balls together, and retire any ball that is misshapen, split or unsuitable for the drill. Never use artificial substances to alter a match ball.

Why cricket-ball storage deserves a system

Leather cricket balls are consumable equipment, but poor handling can shorten their useful life and make a club’s stock difficult to manage.

The main problems are simple:

  • wet balls are dropped into a closed bag
  • match and training balls become mixed
  • no one records how much use a ball has had
  • damaged covers and raised seams go unnoticed
  • a full ball bag is stored in a hot vehicle or damp shed

A basic dry–inspect–label–store routine makes it easier to choose a suitable ball for a match, net or drill.

First, identify the ball’s job

Do not treat every leather ball as interchangeable.

Ball group Typical use Storage priority
New match stock Competition use when rules permit Keep dry, boxed or separated, and clearly counted
Used match balls Replacement stock or controlled practice Record approximate wear and keep comparable balls together
Senior training balls Nets and fielding with experienced players Inspect shape, seam and cover before each session
Junior hard-ball stock Age-appropriate hard-ball sessions Separate by approved size and condition
Soft or modified balls Skill progressions and introductory drills Keep away from leather match-ball stock
Retired display balls Keepsakes or coaching examples only Mark clearly so they cannot re-enter play

Our cricket ball size and weight guide explains why senior, women’s and junior specifications should not be mixed casually.

What the official rules tell us

MCC is the custodian of the Laws of Cricket, while competitions publish their own playing conditions. The ICC’s current playing-condition documents define legal ball specifications and replacement procedures. New Zealand playing conditions also make clear that umpires control replacement decisions and may select a ball with comparable wear.

That matters for storage: a club that may need replacement balls should keep used match balls organised by condition rather than in one anonymous bucket.

New Zealand domestic playing conditions also distinguish between permitted care and unfair alteration. Players may polish the ball as allowed by the competition rules, remove mud under umpire supervision and dry a wet ball with an approved cloth. Artificial substances, seam interference and deliberate changes to shape are not legitimate “care.”

Check the rules for your competition before match day. The ICC playing-conditions library and NZC’s published playing conditions show the distinction between maintaining a ball and altering it.

The post-session routine

Build the routine into pack-down, not the next session.

1. Count the balls

Use a known starting number for each drill group. Count again before players leave the area.

This prevents balls remaining in wet grass, drains, net corners or long outfield. A ball left outside overnight is a storage failure before it reaches the cupboard.

2. Separate by condition

Create at least three temporary groups:

  • dry and apparently sound
  • damp or wet
  • damaged or questionable

Do not return wet balls to the main bag simply because training has finished.

3. Remove loose dirt

Use a clean, dry cloth to wipe off loose soil and grass. Avoid scraping the leather or picking at the seam.

If the ball was used in a match, follow the umpires’ instructions during play. The post-session equipment routine begins after control of the match ball has been handed back appropriately.

4. Air-dry naturally

Place damp balls in a ventilated, secure area at normal room temperature. Keep them away from radiators, heaters, hair dryers and strong direct sun.

Rotate them occasionally so one damp face is not held against a solid surface. Do not seal them in plastic while moisture remains.

5. Inspect before storage

When dry, check the cover, seam, shape and firmness. Record or isolate anything questionable.

How to dry a wet leather cricket ball

The aim is gradual drying, not rapid heating.

Use this sequence:

  1. blot surface moisture with a clean cloth
  2. remove loose mud without pulling at stitches
  3. place the ball on an absorbent, breathable surface
  4. leave space between balls
  5. provide ordinary room ventilation
  6. turn the ball periodically
  7. wait until it is dry before closing it in a bag or box

Direct heat can dry leather unevenly. A tumble dryer, hot-water cupboard, vehicle dashboard or heater is not a controlled shortcut.

For a whole wet kit, use the broader workflow in our guide to drying cricket gear after rain.

What not to apply

Do not improvise with oils, waxes, shoe polish, solvents or household cleaners.

A match ball’s condition is regulated. Artificial substances can change the surface, colour, weight or behaviour and may breach competition rules. Even for training balls, an unapproved treatment can make the cover slippery, transfer residue to hands and equipment, or hide damage.

If a manufacturer supplies specific care instructions for a particular product, follow those instructions. Otherwise, keep the routine conservative: dry cloth, natural drying, inspection and appropriate storage.

Inspecting the seam and cover

Look and feel carefully without trying to lift or tighten anything.

Stop using a ball for hard-ball training if you find:

  • a split leather panel
  • exposed or broken internal material
  • loose stitching that could catch a finger
  • a sharply raised or displaced seam
  • a deep cut or flap in the cover
  • obvious waterlogging that does not resolve after drying
  • an irregular shape

A scuffed ball is not automatically unsafe, and a shiny ball is not automatically match-ready. The decision depends on the cover, seam, shape, competition rules and intended drill.

When in doubt, a coach or equipment manager should remove the ball from circulation until it can be assessed.

Check for loss of shape

Roll the dry ball slowly across a flat surface and view it from more than one angle. An obvious wobble can indicate that the ball is no longer spherical enough for the intended use.

Do not use a misshapen ball in a fast bowling drill simply to exhaust its remaining value. Unpredictable bounce is a safety and training-quality issue.

Retire or downgrade balls deliberately:

  • match stock to replacement stock
  • replacement stock to controlled nets
  • nets to low-speed coaching demonstrations
  • unsuitable balls to clearly marked disposal or display

Not every worn ball belongs in the next lower category. Damage can make immediate retirement the correct choice.

A simple labelling system

The best system is one that coaches will actually maintain.

Use small labelled trays, boxes or breathable ball bags for:

  • NEW MATCH
  • USED MATCH — LIGHT WEAR
  • USED MATCH — MEDIUM WEAR
  • SENIOR TRAINING
  • JUNIOR HARD BALL
  • SOFT / MODIFIED
  • HOLD FOR INSPECTION

Add the season or acquisition month to match stock. For used balls, note the approximate overs or session count only if the club can record it consistently.

Avoid writing directly on the playing surface unless the competition and ball supplier permit an identifying mark. Container labels are simpler.

Rotation for training

A mixed set creates mixed practice.

For a bowling drill, select balls that are reasonably similar in:

  • size and weight category
  • cover condition
  • seam prominence
  • moisture state
  • age and firmness

Rotate the set so one favourite ball is not used for every demonstration while the rest remain untouched.

For fielding, inspect balls after repeated contact with fences, concrete edges or abrasive indoor surfaces. A ball suitable for catching drills may not be suitable for fast bowling at a batter.

Our training ball guide can help match ball type to player stage and drill intensity.

Match-day replacement stock

Competition officials decide whether and how a ball is replaced. Club staff should make that process easier by presenting organised stock.

Before the match:

  • confirm the approved ball type
  • count new balls and used replacement balls
  • group replacements by comparable wear
  • keep them dry and under the required control
  • make the equipment manager responsible for the handover

Do not polish, roughen or otherwise adjust a used ball to make it resemble another one. Similar wear should come from genuine use and proper record-keeping.

Where to store cricket balls

Choose a storage area that is:

  • dry
  • ventilated
  • secure
  • away from direct sunlight
  • away from heaters and large temperature swings
  • off a damp floor
  • protected from pests and chemicals

A lidded plastic tub can be useful for transport, but it is not a drying cabinet. Only close it once the contents are dry. If the storage room is prone to damp, solve the room problem rather than relying on sealed packaging to trap existing moisture.

Bags, boxes and racks

Different containers suit different stages.

Container Best use Limitation
Ventilated ball bag Dry training balls in regular use Poor choice for balls that are still wet
Original box New match stock and counting Cardboard can absorb moisture
Labelled open tray Drying and inspection Needs a secure indoor location
Divided crate Separating wear grades Must be kept clean and dry
Sealed transport tub Moving dry stock in bad weather Traps moisture if closed too early

Keep heavy containers at a safe lifting height. A club’s ball stock can become surprisingly heavy.

Monthly club audit

Once a month during the season:

  • count new match stock
  • inspect used replacement balls
  • remove wet or damaged balls from bags
  • verify junior and senior balls are separated
  • clean and dry the containers
  • check labels are readable
  • review which drills are consuming the most balls
  • assign replacement purchasing before stock becomes critical

Add this audit to the coach equipment checklist so responsibility is clear.

Buying replacements in New Zealand

Choose the correct specification for the player group and competition rather than buying one generic carton for every use. If you need a local summary of construction, size and colour choices, the NZ Cricket Store cricket-ball guide is a useful additional reference.

That is a buying aid, not a substitute for your association’s current playing conditions.

The bottom line

Good cricket-ball care is mostly disciplined handling.

Count balls back in, separate wet stock, dry naturally, inspect the seam and cover, label by use and store in a dry ventilated place. Keep match replacements organised by genuine wear, and never treat artificial alteration as maintenance. A clear system protects the equipment budget and gives every training group a more consistent, appropriate set of balls.

How CricketWise researches and updates its guides →