← All guides

Cricket Warm-Up Equipment Guide: Bands, Hurdles, Ladders and Cones

Build a simple cricket warm-up kit and use it safely, with practical choices for resistance bands, mini hurdles, agility ladders, cones and junior sessions.

Junior cricket players moving during an outdoor training activity
Quick answer

A useful cricket warm-up kit is small: bright cones, a few low hurdles, flat markers and light resistance bands selected for the players. Equipment should support a progressive dynamic warm-up, not turn it into an obstacle course. Begin with easy whole-body movement, add controlled mobility and direction changes, then rehearse cricket actions at rising intensity. Keep lanes clear, inspect every item, adapt the session to age and ability, and follow New Zealand Cricket's current warm-up and workload guidance.

A good cricket warm-up prepares players for the movements they are about to perform. It does not need a trolley of specialist equipment, and it should never become a test of who can survive the hardest circuit.

New Zealand Cricket describes warm-up work as preparation for both performance and injury-risk reduction. Its community coaching resources include a dynamic warm-up video and a dedicated warm-up programme. The practical implication for a coach is simple: equipment is useful only when it helps players move progressively, safely and with purpose.

This guide explains what to buy, what to skip and how to organise a compact warm-up kit for a team, school or club.

What the equipment should achieve

A warm-up usually needs to move through three broad jobs:

  1. raise general movement and attention
  2. prepare the ranges of motion and movement patterns needed that day
  3. rehearse cricket-specific actions at an appropriate intensity

Cones can define a safe area. Hurdles can cue controlled stepping and landing. Bands can add light activation. A ladder can organise footwork. None of them replaces coaching judgement, an appropriate progression or the player’s own feedback.

ACC’s SportSmart framework says physical conditioning is multifactorial and should be planned for the athlete and sport. That is a useful guardrail: one fixed circuit is unlikely to suit a Year 5 beginner, a teenage pace bowler and an adult returning from injury.

The basic cricket warm-up kit

Item Useful quantity Best use Buying priority
Flat marker discs 12–20 Boundaries, stations, landing targets Essential
Bright cones 8–12 Lanes, direction changes, exclusion areas Essential
Mini hurdles 4–8 Stepping, low hops, rhythm and landing control Useful
Light resistance bands 4–8 Controlled activation and partner-free movement Useful with supervision
Agility ladder 1–2 Simple footwork patterns and spacing Optional
Measuring tape 1 Consistent lane and station spacing Useful
Storage bag 1 Inspection, transport and stock control Essential

Buy for the session you actually deliver. A club that runs four small groups may get more value from extra markers than from one elaborate ladder.

Cones and flat markers

Cones are the most versatile warm-up equipment. They create visual boundaries, make traffic direction obvious and help separate moving groups.

Choose markers that are:

  • bright enough to see against grass or indoor flooring
  • flexible rather than brittle
  • low enough for the activity
  • large enough not to disappear in long grass
  • easy to collect and count

Flat discs are preferable when players must run across or close to the marker. Taller cones are better for boundaries and turning points but can become trip hazards in congested drills.

Use different colours consistently. For example, blue can mean start, yellow change of direction and red stop. That reduces explanation time and helps players scan the area.

Our cricket coaching cones and markers guide covers layout, care and storage in more detail.

Mini hurdles

Low hurdles can develop rhythm, controlled foot placement and landing awareness. Their value is precision, not height.

For community cricket, look for hurdles that:

  • sit low to the ground
  • flex, tip or collapse when contacted
  • have no sharp edges or exposed metal
  • remain visible in the training environment
  • stack without distorting

Place them on a stable, level surface with enough run-off beyond the final hurdle. Begin with walking and stepping patterns before adding faster movement. If players are clipping hurdles, shorten the set or reduce the speed rather than telling them to “try harder”.

Hurdles should not be used to create maximal jumps in a general team warm-up. Higher-impact plyometric work requires an appropriate programme and coaching competence.

Resistance bands

Resistance bands are portable and inexpensive, but they need more control than cones.

Before use, inspect each band for:

  • nicks, thin areas or cracks
  • whitening or surface changes
  • damaged handles or anchor points
  • sticky or degraded material
  • evidence that it has been overstretched

Retire a damaged band. Do not knot it, tape it or hand it to a smaller player.

Choose light resistance that allows smooth movement and good posture. A warm-up is not a strength contest. Bands can support controlled lateral steps, shoulder movement and simple trunk preparation, but the exercise and resistance must suit the player.

Never anchor a band to a fence, sightscreen, net post or loose equipment unless both the product instructions and facility setup explicitly support that use. Keep bands away from faces, and do not let players release a stretched band towards a partner.

For juniors, use direct supervision and short sets. If the coach cannot monitor the station, select an unresisted movement instead.

Agility ladders

An agility ladder can make foot placement visible, but it does not create agility by itself. Cricket movement involves reacting to the ball, opponent and field setting; memorising a complex ladder dance has limited transfer.

Use a ladder for simple tasks:

  • forward steps with an athletic posture
  • lateral movement in both directions
  • short acceleration out of the final square
  • controlled deceleration after the ladder
  • a cue before a cricket-specific catch or pickup

Lay the ladder flat and pull every strap straight. Do not use it on a slippery surface or where loose rungs lift underfoot. Give players space at both ends and run one direction through the lane.

If the ladder creates queues, use painted lines or pairs of flat markers to create several lanes instead.

A progressive 12-minute structure

This is a framework, not a prescription. Use NZC’s current programme and the needs of your group.

Minutes 0–3: raise temperature and focus

Use a marked area for light jogging, side movement and a simple tag or relay activity. NZC’s junior resources use short, game-based warm-ups to get players moving and ready for cricket.

Keep collisions out of the design. Give clear travel directions and a stop signal before starting.

Minutes 3–6: mobility and control

Move through controlled patterns such as walking lunges, side steps, trunk turns and arm movements. Choose movements relevant to the planned session and demonstrate the range you expect.

Add light bands only where they improve control. Players should be able to speak comfortably and maintain technique.

Minutes 6–9: rhythm and direction

Use low hurdles, markers or a ladder for two or three simple patterns. Include acceleration and deceleration, not just rapid feet.

Change one variable at a time. Faster movement, a new direction and a ball-handling task should not all arrive together.

Minutes 9–12: cricket-specific rehearsal

Transition into short catches, pickups and throws; progressive bowling run-ups; or controlled batting footwork. Increase intensity gradually and keep the first live-ball work predictable.

Pace bowlers should also follow the current age-appropriate workload guidance. A warm-up does not cancel the need to manage bowling volume.

Station spacing and group flow

The best equipment plan prevents people and balls from crossing paths.

  • Put non-ball movement on one side of the training area.
  • Keep throwing and catching lanes facing away from warm-up queues.
  • Leave clear run-off after accelerations and hurdles.
  • Mark waiting positions outside the active lane.
  • Use one-way travel where possible.
  • Keep spare equipment in a closed bag, not scattered beside a station.

Do a walking inspection from a player’s eye level. A flat marker that looks obvious to a standing coach may vanish behind a hurdle or another player.

Junior and mixed-ability sessions

Younger players need fewer instructions and more space. Use games, simple patterns and modified equipment rather than adult conditioning circuits.

A mixed group can use the same station with different options:

Station Foundation option Progression
Marker lane Walk and stop under control Accelerate, then decelerate at the marker
Low hurdles Step over with balance Low two-foot or alternating rhythm where appropriate
Band station Unresisted movement Light band with direct supervision
Catch station Stationary soft-ball catch Move to a marker before catching

Do not label the simpler option as punishment or failure. It is a valid route through the warm-up.

What not to buy first

Heavy resistance systems

Sleds, heavy cords and large weighted equipment need more space, maintenance and coaching control. They are not necessary for a basic community warm-up.

Tall fixed hurdles

Rigid hurdles increase the consequence of a mistake and are harder to use with mixed ages.

Electronic reaction lights

They can be engaging, but cones and a coach’s visual or verbal cue can create useful decision-making at a fraction of the cost.

Huge bundles of identical bands

Bands degrade in storage. Buy a manageable number, inspect them and replace deliberately.

Inspection and cleaning checklist

Before every session:

  • surface checked for holes, moisture and debris
  • cones and markers visible and unbroken
  • hurdle feet stable and edges intact
  • ladder flat with no twisted straps
  • bands inspected end to end
  • run-off and waiting zones clear
  • station directions and stop signal explained

After the session, wipe dirt and moisture from equipment, allow it to dry and store it away from direct sun and excessive heat. Count bands and hurdles as they go into the bag so damage or missing items are noticed before the next session.

Budget choices

For a small junior team, start with markers, cones, a tape measure and a strong storage bag. Add low hurdles when the coach has a specific use for them. Add bands only when there is enough supervision and a clear movement plan. Treat a ladder as an optional organiser, not a required performance tool.

The club’s money is often better spent on several safe, well-spaced stations than one premium device that creates a queue.

Bottom line

Warm-up equipment should clarify movement and space. It should not dominate the session.

Start with cones and flat markers, add low hurdles or light bands for a defined purpose, and keep every progression appropriate to the players in front of you. Follow NZC’s warm-up and workload resources, inspect the surface and equipment, and move from general activity towards cricket-specific rehearsal without sudden jumps in speed or complexity.

Sources and further reading

Image: existing CricketWise editorial asset.

How CricketWise researches and updates its guides →