← All guides

Wicketkeeping Inner Gloves Guide: Fit, Materials and Care

Choose wicketkeeping inner gloves by comparing chamois, cotton and padded designs, then check fit, manage sweat, rotate pairs and replace worn inners safely.

Cricket players preparing for a match on an outdoor ground
Quick answer

Wicketkeeping inner gloves should fit close to the hand without restricting finger movement or creating folds inside the outer glove. Choose a thin cotton-style pair for moisture management and a more padded or chamois-palmed pair when extra cushioning is wanted, provided the complete glove system still fits correctly. Test inners inside the actual wicketkeeping gloves, make a fist and catching shape, check the fingertips and web area, and keep at least one dry spare pair. Wash only as the maker directs, air-dry fully away from direct heat, and replace inners when padding compresses, seams rub, grip changes or the fit becomes loose.

Inner gloves are part of a glove system

Wicketkeeping inner gloves sit between the hand and the outer wicketkeeping glove.

They can help with:

  • moisture management
  • comfort against seams and internal surfaces
  • a closer, more stable fit
  • an additional layer of cushioning
  • keeping the outer glove interior cleaner

They cannot repair a badly fitting or damaged outer glove. A thick inner does not make an oversized outer glove correct, and no inner turns worn catching surfaces or broken protective elements into safe equipment.

Choose the outer glove and inner glove as one system. The final test is how both feel and move together.

Our wicketkeeping gloves fit and care guide covers the outer glove in detail.

Are wicketkeeping inners required?

The Laws regulate the wicketkeeper’s outer gloves, including the permitted webbing between thumb and index finger. They do not prescribe one universal inner-glove material or thickness.

Manufacturers commonly recommend wicketkeeping-specific inners beneath the outer gloves, and many keepers prefer them for comfort and sweat management.

The practical answer is:

  • follow the outer-glove manufacturer’s instructions
  • follow competition requirements
  • use a wicketkeeping-specific inner that does not distort the outer glove
  • do not modify either glove in a way that affects compliance or performance

MCC Law 27 confirms that the wicketkeeper is the fielder permitted to wear gloves and external leg guards, and it specifies the construction of the outer glove webbing. If an outer glove has been altered, damaged or repaired around that area, it should be checked against the current Law and competition process.

The main inner-glove materials

Product names vary, but most inners fall into three practical groups.

Type Typical feel Strength Watch for
Cotton or fabric Light, soft and flexible Sweat absorption and easy rotation Becomes damp; limited impact cushioning
Chamois-palmed Close, tacky or slightly structured palm feel Traditional feel and moisture management Care requirements; can stiffen if dried poorly
Padded synthetic or mixed-material More cushioning and structure Additional comfort for repeated takes Bulk, heat and reduced space inside outer glove

Material labels alone do not determine performance. Thickness, seam placement, finger length and the relationship with the outer glove matter just as much.

Cotton and fabric inners

Light fabric inners are useful when the outer glove already fits closely and the keeper mainly wants a washable moisture layer.

Advantages can include:

  • low bulk
  • flexible fingers
  • quick changes between spells or innings
  • lower cost for spare pairs
  • simpler washing when the care label permits it

They generally provide less cushioning than a padded or chamois design. Once saturated, they may feel slippery, bunch at the fingertips or transfer moisture to the outer glove.

Carry at least one dry spare pair during long or humid matches.

Chamois-palmed inners

Chamois-style palms are traditional in wicketkeeping. They can provide a close feel, moisture handling and a modest cushioning layer.

They need correct care. A natural or chamois-like palm may change texture if it is soaked, exposed to harsh detergent, twisted aggressively or dried beside direct heat.

Before buying, check:

  • whether the material is genuine chamois, synthetic chamois or a blend
  • the maker’s washing method
  • whether the palm is full or partial
  • seam position around thumb and first finger
  • how the material feels after repeated flexing

Do not assume every pale palm is maintained in the same way.

Padded inners

Padded inners add material at the palm, fingers, thumb or a combination of areas.

They may suit a keeper who wants more separation from repeated ball impact, but padding creates bulk. The outer glove must still close naturally around the hand.

Too much internal volume can:

  • push fingertips away from their intended position
  • restrict the thumb-index catching shape
  • create pressure across the knuckles
  • reduce feel
  • make the keeper tighten the hand unnecessarily
  • stretch internal seams or closures

Never choose padding by squeezing the inner alone. Put it inside the actual outer glove and repeat realistic movements.

Full-finger and shortened-finger designs

Many wicketkeeping inners are full-finger. Some designs leave part of a finger exposed or use a shortened shape to change feel and ventilation.

A full-finger design provides a continuous layer between skin and outer glove. A shorter design may feel cooler or more direct but can create an edge where fabric ends.

Check local rules and manufacturer guidance, then judge:

  • exposed seam pressure
  • rubbing during repeated flexion
  • fingernail contact
  • whether the outer glove lining catches the inner
  • whether sweat concentrates at the transition

Do not cut the fingers from a full-finger inner as an improvised modification. Buy a design intended for that configuration.

Fit starts with hand length and width

An inner should sit close without pulling.

Look for:

  • fingertips reaching the ends without being compressed
  • no empty folds at the finger ends
  • the thumb seated fully
  • palm fabric lying flat
  • cuff secure without restricting the wrist
  • seams sitting away from high-pressure points

If the size chart uses hand length, measure from the wrist crease or stated starting point to the tip of the middle finger exactly as the maker instructs. If it uses palm circumference, measure around the specified part of the hand without pulling the tape tight.

Do not transfer a batting-glove size automatically. Brands and product types can use different patterns.

Test the inner inside the outer glove

The complete system should pass five movements.

1. Open hand

Spread the fingers naturally. The inner should not pull between them or drag the outer glove inward.

2. Catching cup

Bring the thumbs and index fingers toward a normal catching shape. Check that the inner does not bunch in the web area.

3. Soft fist

Close the hand without maximum force. There should be no sharp seam pressure at fingertips, knuckles or palm crease.

4. Wrist movement

Flex and extend the wrist. The cuff should stay in place without digging into the wrist or colliding with other protection.

5. Repeated opening

Open and close the glove at least twenty times. Small folds and pressure points often appear only after repetition.

Use a clean, appropriate practice ball only when the seller or club permits it. Do not test a new retail glove with dirty or abrasive equipment.

Signs the inner is too small

  • fingertips are compressed
  • finger seams pull against nails
  • palm cannot flatten
  • web area feels tight
  • cuff rides up
  • outer glove is difficult to open fully
  • numbness, tingling or persistent pressure appears

Sizing up the inner may not solve the problem if the outer glove is too small.

Signs the inner is too large

  • fabric folds at fingertips
  • palm bunches during a catch
  • the inner slides when the outer glove is removed
  • seams rotate around the fingers
  • cuff moves excessively
  • keeper grips harder to stabilise the glove

A loose inner can create blisters and reduce consistent feel.

Match the inner to the outer-glove volume

Two outer gloves labelled the same size may have different internal volume.

A keeper may use:

  • a thin inner with a close-fitting outer glove
  • a moderately padded inner with a roomier outer glove
  • different inner thicknesses across two outer-glove models

Do not use thickness to fill a major sizing gap. The outer glove still needs the correct finger length, palm position and wrist security.

If buying online, compare the maker’s size information for both products and choose a retailer with clear exchange conditions. Keep labels attached until the clean indoor fit check is complete.

Junior wicketkeepers

Junior hands change quickly, but oversized inners are not a good growth strategy.

An oversized inner can fold inside the outer glove and make catching less predictable. A too-small inner can restrict fingers and create pressure.

For a junior:

  1. measure both hands
  2. test the dominant catching setup
  3. put the inner inside the actual outer glove
  4. ask the player to describe pressure, not only say whether it feels “fine”
  5. repeat the check during the season

The player should be able to remove and replace the inners without turning fingers inside out or needing the cuff stretched aggressively.

The junior cricket gear checklist covers the rest of the player’s essential equipment.

Standing back and standing up

The same keeper may experience the glove differently when standing back to pace and standing up to the stumps.

Standing back often involves harder takes and greater ball movement. Standing up demands quick hand positioning and a compact transfer.

Do not treat this as a reason to keep changing equipment during an innings without preparation. Instead, test the chosen inner-and-outer combination in both training situations.

Ask:

  • can the hand form a relaxed catching cup?
  • can the ball be transferred cleanly?
  • does padding interfere with finger speed?
  • does the inner remain stable after repeated takes?
  • does sweat change the fit?

Technique and coaching remain central. Equipment should support the movement, not prescribe it.

Sweat management

Inner gloves absorb moisture that would otherwise reach the outer glove, but they have a finite capacity.

For a long match:

  • start with a completely dry pair
  • keep a spare pair in a clean, dry pouch
  • change at an appropriate interval, not during active play
  • use a separate bag for the damp pair
  • air both pairs after the match

Do not return a saturated pair to the clean pocket. Moisture will spread to the spare pair and outer gloves.

A small towel can help dry hands during a break, but do not apply powders, grip products or chemicals unless the equipment maker and competition permit them.

Blister and rubbing prevention

Common rubbing points include:

  • thumb base
  • web between thumb and index finger
  • fingertip seams
  • side of the little finger
  • wrist cuff

If rubbing begins:

  1. stop and inspect the fit
  2. check whether a seam has rotated
  3. change out of a wet inner
  4. inspect the outer glove lining
  5. address skin damage appropriately

Do not solve persistent pressure by cutting seams, adding hard material or heavily taping the glove. The size or model may be wrong.

Seek qualified medical advice for significant pain, swelling, numbness or injury. Inner gloves are not medical protection.

Washing and drying

Always start with the care label or manufacturer instructions. Materials differ.

A cautious routine, when permitted, is:

  1. separate inners from outer gloves immediately after play
  2. remove loose surface dirt
  3. wash by the specified hand or machine method
  4. use only the recommended temperature and cleaning product
  5. reshape without aggressive twisting
  6. air-dry fully in shade and ventilation
  7. keep away from direct heaters and extreme heat

Do not put damp inners back inside the outer gloves. Official manufacturer guidance for wicketkeeping gloves emphasises that the outer glove and any inner glove should be completely dry for use.

If chamois becomes stiff, follow the material-specific maker instructions. Do not improvise with oils, conditioners or solvents.

Caring for the outer gloves at the same time

Removing the inners gives the keeper a chance to inspect the outer pair.

Check:

  • palm wear and grip surface
  • webbing and its attachment
  • finger protection
  • internal lining
  • seams
  • wrist closure
  • odour or moisture that does not clear with drying

Clean the outer glove only by its own instructions. A washable inner does not mean the outer glove can be soaked.

Store the outer gloves open and ventilated, away from direct sunlight and extreme temperatures. Do not compress them beneath bats, pads or a loaded wheelie bag.

For more on the outer glove itself, revisit the wicketkeeping gloves fit and care guide.

Use a rotation system

One pair in use, one pair drying and one clean reserve is a practical setup for frequent keepers.

Label pairs subtly so their age and care cycle remain clear. Rotate them rather than wearing one pair to failure while another remains unused.

A simple season log can record:

  • date first used
  • washes
  • seam repairs permitted by the maker
  • persistent pressure points
  • loss of shape
  • replacement date

The log is especially useful for a club that loans equipment to several juniors.

When to replace inner gloves

Replace or retire a pair when:

  • holes expose the skin
  • seams rub or open
  • padding has compressed unevenly
  • fingertips have stretched and fold
  • grip inside the outer glove has changed
  • the cuff no longer holds position
  • odour or contamination remains after proper cleaning
  • material has hardened, cracked or distorted
  • the player’s hand has outgrown the size

Do not wait for both gloves to fail. Uneven wear between hands can change feel and movement.

Replacement timing depends on use, material, care and fit. A fixed number of matches is less useful than a regular condition check.

What to pack on match day

Pack:

  • one completely dry primary pair
  • one dry spare pair
  • a breathable clean pouch
  • a separate washable bag for damp inners
  • small towel
  • outer wicketkeeping gloves, inspected and dry
  • wicketkeeping pads
  • batting gloves and protection if the player also bats

Keep the inners out of the shoe compartment. Do not store a hard ball inside an outer glove.

The match-day kit-bag packing guide shows how to create clean, protected and wet zones.

Buying checklist

Fit

  • correct finger length
  • flat palm without folds
  • thumb fully seated
  • cuff secure
  • no sharp seams
  • complete outer glove still opens and closes naturally

Material

  • desired balance of moisture handling and cushioning
  • care method is practical
  • padding does not create excess bulk
  • spare pair is affordable and available

Use

  • suitable for training and match volume
  • works standing back and standing up
  • easy to change during an interval
  • dries within the player’s normal routine

Condition plan

  • pair can be inspected easily
  • replacement signs understood
  • clean and damp pairs can be separated
  • outer glove care remains compatible

Common mistakes

Buying inners without the outer gloves

The inner feels comfortable alone but makes the full system too tight.

Choosing maximum padding

More padding reduces space and may restrict the catching shape.

Using one pair all day

The inner becomes saturated and changes fit.

Drying beside a heater

Heat distorts or hardens material and can damage seams.

Using batting inners as an automatic substitute

The pattern, padding and seam positions may not suit wicketkeeping gloves.

Wearing a larger size for growth

Folds and movement appear inside the outer glove.

Treating inners as impact certification

They are one comfort and cushioning layer, not a guarantee against hand injury.

A sensible starter setup

For a new wicketkeeper:

  • measure the hand using the chosen maker’s method
  • choose the outer glove first or test both products together
  • begin with a close-fitting wicketkeeping-specific inner
  • buy a second dry pair if match length or climate warrants it
  • practise in the complete system before match day
  • establish washing and air-drying from the first use

The best inner is not the thickest or most expensive. It is the pair that remains stable, dry enough and comfortable inside the correct outer glove while allowing relaxed hand movement.

Sources and further reading

Follow current Laws, competition requirements and the care and sizing instructions supplied with the actual inner and outer gloves. Equipment guidance does not replace coaching or medical advice.

How CricketWise researches and updates its guides →