← All guides

Wicketkeeping Gloves Guide: Size, Fit, Inners and Care

How to choose and fit wicketkeeping gloves, decide between inner-glove options, check the webbing and catching surface, and know when a pair needs replacing.

Cricketer in protective equipment ready for a fielding session
Quick answer

Choose wicketkeeping gloves from the maker's current hand-length chart, then test them with the inner gloves you will actually wear. The fingertips should reach close to the ends without being crushed, the glove should close naturally around a ball, and the thumb–index web should sit taut without forcing the hand open. Keep the palms clean and dry, rotate or wash inners as directed, and replace gloves when the catching surface, webbing, finger protection or wrist closure can no longer perform reliably.

Wicketkeeping gloves are not batting gloves

Batting gloves protect hands gripping a bat. Wicketkeeping gloves are catching equipment: they have a broad palm, a shaped thumb, finger protection and a legal web between the thumb and index finger.

That changes the fit test. A keeper needs enough room for an inner glove and repeated impact, but not so much spare space that the outer glove twists or delays the hand closing around the ball.

The best size is the pair that lets the keeper:

  • present both palms cleanly to the ball
  • close the hands without fighting stiff or excess material
  • keep the fingertips inside the protected ends
  • spread the thumb and index finger naturally
  • move the wrists without the cuffs colliding
  • wear the intended inners without pressure or numbness

Brand labels are only a starting point. “Youth”, “adult” and “large” are not universal measurements.

Start with hand length

Use the exact size chart for the glove being considered. A common manufacturer method is to measure from the base of the palm to the tip of the middle finger. Some instructions describe the start point as the wrist crease, so follow the diagram supplied with that product.

Measure both hands:

  1. Place the hand flat with fingers together and relaxed.
  2. Position a ruler or tape at the chart’s stated palm or wrist point.
  3. Measure in a straight line to the tip of the middle finger.
  4. Repeat on the other hand.
  5. Use the larger measurement when the hands differ.
  6. Compare the result with the current product chart.

Do not choose a junior pair only from age. Growth, hand shape and finger length vary widely.

How should wicketkeeping gloves fit?

Put on the inner gloves first if they will be used in matches. Fasten the wicketkeeping gloves as intended, then check each area.

Fingertips

The fingers should sit close to the protected ends without being compressed. A small amount of working space is normal, especially with inners, but the outer fingertips should not fold over or flap when the keeper closes the hand.

If the fingers are pushed hard into the ends, the glove is too small or the inner is too bulky. If there is a deep empty pocket beyond several fingertips, control will suffer.

Palm

The palm should lie close enough to move with the hand. A broad loose fold across the catching surface can change how the ball settles or rebounds.

Open and close the hand ten times. The glove should follow the movement rather than sliding around the skin.

Thumb

The thumb needs protection and freedom to oppose the fingers. Check that it reaches the end of its section without being forced outward. Pain at the thumb base, a pinched nail or a glove that prevents a relaxed catching shape are all poor signs.

Wrist and cuff

The closure should hold the glove securely while allowing the wrists to flex. It should not need to be pulled to its absolute limit. Check both hands together in a normal wicketkeeping stance: some bulky cuffs collide when the hands meet.

Webbing

The web between thumb and index finger should open smoothly and sit taut when the thumb is fully extended. It should not have tears, loose stitching, unauthorised additions or a shape that extends beyond the legal limits.

MCC Law 27 specifies that wicketkeeping gloves may have webbing only between the index finger and thumb. The web must be a single piece of non-stretch material, and its top edge must not protrude beyond the straight line between the tips of the index finger and thumb when worn.

The ball-control test

A static try-on can miss the most important problem: whether the keeper can receive and secure the ball.

Use a clean, appropriate practice ball and work at low speed:

  1. Hold both hands in a relaxed receiving position.
  2. Close each glove around the ball separately.
  3. Catch gentle underarm feeds to the centre of both palms.
  4. Catch feeds just inside each thumb.
  5. Bring both gloves together as for a take in front of the body.
  6. Move laterally and repeat.
  7. Practise one low take and one chest-height take.

The ball should settle without the outer glove rotating. The keeper should not need to squeeze painfully hard to prevent it escaping.

New gloves can feel firmer than a used pair. That is different from being the wrong size. Break them in gradually through clean, controlled catching rather than soaking, heating or forcing the materials.

Why wear wicketkeeping inners?

Inners sit between the hand and the wicketkeeping glove. Depending on their construction, they can:

  • absorb sweat
  • reduce rubbing
  • add a layer over the palm and fingers
  • make cleaning easier
  • help the outer glove retain a more consistent interior

They are not a substitute for correctly fitted outer gloves. Adding thick inners to an already tight pair can compress the fingertips and reduce feel.

Cotton inners

Cotton options are usually light and easy to rotate through training. They are useful for sweat management but may provide less padding than thicker designs.

Chamois-style inners

These are often chosen for feel, moisture management and a closer fit. Care requirements vary, so follow the label rather than treating every material the same way.

Padded inners

Padding can increase comfort during repeated hard-ball work, but it also occupies space. Always size the outer glove while wearing the intended padded inner.

Full-finger or fingerless

Full-finger inners put a layer around every finger. Fingerless designs can feel less bulky but leave more skin in direct contact with the outer glove. The choice is personal provided the total setup fits, stays dry enough and does not restrict movement.

Keep at least one dry spare pair for long matches or wet training. A fresh inner is easier to change than a saturated outer glove.

Palm materials and catching feel

Wicketkeeping gloves use different palm compounds, textures and patterns. Product language can make one surface sound universally “grippier”, but the useful question is how it behaves in the keeper’s conditions.

Consider:

  • new-ball pace and repeated impact
  • standing back or standing up
  • dry, damp or dusty conditions
  • the keeper’s preferred inner glove
  • flexibility when new
  • how quickly the surface becomes dirty or polished
  • access to replacement and repair support

Never add a sticky substance or modify the palm to gain an unfair advantage. Keep the surface in the condition intended by the manufacturer and the Laws.

Standing back versus standing up

The glove does not change the basic need for correct size, but different work can expose different fit problems.

Standing back to faster bowling involves higher-impact takes and more lateral movement. Loose fingertips and a weak wrist closure become obvious quickly.

Standing up to the stumps demands clean hand presentation, fast closing and unobstructed wrist movement. A stiff oversized glove can make precise takes and transfers harder.

The NZC wicketkeeping curriculum emphasises positioning, alignment and glove presentation. Equipment should support those skills, not dictate an unnatural hand shape.

Junior fitting: do not buy too far ahead

Oversized gloves are tempting when a young keeper is growing, but excess length can fold, twist and reduce confidence. Buy for useful current fit, with modest adjustment—not several seasons of empty space.

For juniors:

  • measure again at the start and middle of the season
  • check the fit with the current inners
  • use controlled feeds before full-pace practice
  • ask where the glove rubs or feels heavy
  • watch whether the child can close both hands fully
  • keep batting and wicketkeeping gloves clearly separated

A child dropping the ball may need technique coaching, but equipment that is too large can create the same symptom. Check both.

For a broader equipment overview, see our junior cricket gear checklist and protective-equipment guide.

A five-minute fitting routine

Use this routine in a shop or when a delivered pair arrives:

1. Inspect before wearing

Check that both gloves match, all stitching is complete, the webbing is symmetrical and the closures operate correctly.

2. Put on match inners

Do not test with bare hands if padded inners are part of the normal setup.

3. Seat every finger

Gently work the fingers and thumb into place. Fasten the wrist closure without overtightening.

4. Make a receiving shape

Open both palms toward an imaginary ball. The gloves should not force the thumbs apart or curl the fingertips inward.

5. Close around a ball

Test each hand, then both together. Look for excess folding or rotation.

6. Move like a keeper

Crouch, rise, shuffle both ways, bring the hands up and complete a gentle transfer to the throwing hand.

7. Remove and check the skin

Deep red pressure points, numbness or nail pressure indicate a fit problem. General warmth is normal; pain is not.

Care after every session

Gloves are regularly exposed to sweat, damp grass, dust and ball dye. A simple routine slows deterioration.

After play:

  1. Remove the inners immediately.
  2. Open the wrist closures.
  3. Wipe loose dirt from the palms with a soft dry or barely damp cloth if the maker permits.
  4. Air-dry the gloves away from direct heat and strong sun.
  5. Dry or wash the inners according to their care label.
  6. Store the outer gloves with the palms supported, not crushed beneath heavy kit.

Do not put leather, rubber or composite wicketkeeping gloves in a washing machine unless the maker expressly allows it. Do not dry them on a radiator, heater or car dashboard.

The equipment-cleaning guide explains how to separate wiping, drying and washable layers across a complete kit.

Damp matches and rain

If gloves become wet, blot surface moisture and let them dry slowly in moving air. Remove inners and open every closure. Pack them only after they are fully dry.

Forcing heat into wet materials can cause hardening, distortion or adhesive failure. A sealed kit bag can encourage odour and mould.

During a long wet day, rotate dry inners and use a clean towel between innings. Follow the maker’s advice before applying any conditioner; a product intended for one material can damage another or alter the catching surface.

When to replace wicketkeeping gloves

Replace or seek specialist advice if you find:

  • split, polished or deeply worn catching surfaces
  • torn or stretched thumb–index webbing
  • loose stitching around fingers or palm
  • compressed padding that no longer recovers
  • exposed hard components
  • finger protection that has shifted
  • a wrist closure that releases during use
  • permanent distortion after drying
  • an odour or mould problem that cannot be safely removed
  • a keeper who has outgrown the pair

Do not wait for a complete failure. A glove used for frequent hard-ball training deserves regular close inspection.

Common buying mistakes

Sizing from age alone

Measure the hand and use the current product chart.

Testing without inners

The final combination can be a full size tighter than the bare-hand try-on suggests.

Buying oversized gloves for growth

Excess fingertip space and a loose palm reduce control.

Choosing only by price or player endorsement

Fit, legal construction, condition and intended workload matter more.

Assuming every palm feels the same

Compounds, patterns and stiffness vary. Test clean ball control where possible.

Ignoring the web

The web is both functional and regulated. Inspect its size, tension and stitching.

Storing damp gloves in the kit bag

Moisture accelerates odour, mould and material breakdown.

Buying checklist

  • Both hands measured using the maker’s method
  • Current product size chart checked
  • Normal inner gloves worn during fitting
  • Fingertips close to, but not crushed into, the ends
  • Palm closes without a large loose fold
  • Thumb moves naturally
  • Wrist closure secure without excessive tension
  • Webbing legal, taut and undamaged
  • Gloves tested around a clean ball
  • Crouch, lateral movement and transfer tested
  • Care instructions available
  • Returns policy understood before live-ball use

New Zealand readers who also need a complete role-based kit check can use the NZ Cricket Store wicketkeeping gear guide. Confirm any purchase against the exact manufacturer’s current chart and instructions.

Sources and further reading

Competition rules and the instructions supplied with the exact gloves take priority. Stop using equipment that causes pain, numbness or unreliable protection.

How CricketWise researches and updates its guides →